°The premium builder gel is a polymer, light-curing material, which, due to its strength, makes it possible to significantly extend the nail plate .

°15ml

° Acid free

° Suitable for all types of extensions

°Shock absorbing properties, does not break

°Consistency = medium, thick

°Average pigmentation

°Does not burn under the lamp

°Does not shrink and retains its shape nicely (arch).

° Thixotropic

° The gel adapts its consistency according to the air temperature, it is thicker in consistency in cold environment and thinner in warm environment.

°The gel can be warmed up to make it thinner

°The gel contains photoinitiators that start the polymerization process when the material is exposed to UV light of a certain wavelength.

° The wavelength for polymerization = 380-420nm

°Power UV/LED lamp = 36-48W

°Permitted coating thickness = 0.5mm at the free edge and 1mm at the apex

°Full polymerization= 120 sec

°Apply a rubber base under the builder.

°Brand: Luna Moon

°Country: Ukraine

Lunamoon builder gel 20

Name: Lunamoon builder gel 20
SKU: L100

SKU: L100

€14.00

Quantity

1)Prepare the nail with a 220 grit file or a 100 grit buffer
2)Manicure
3) Degreasing the nails: We use 5 separate wipes, one for each nail.
4)Dehydrator
5)Ultrabond/Primer if desired. Look at the acidity of the product you are going to use, if the product is acidic enough, you do not need a primer
6) Rubber base (best with a flat gel brush, make dabbing movements) polymerize for 60 sec.
8)Apply builder gel (0.5 -1mm) line out and polymerize for 120sec, remove sticky layer
9) Use top coat of your choice
1)Shorten the nail to 1mm and file the free edge into a round shape
2)Prepare the nail with a 220 grit file or a 100 grit buffer
3)Manicure
4) Degreasing the nails: We use 5 separate wipes, one for each nail.
5)Primer (optional)
6) Rubber base (best with a flat gel brush, make dabbing movements) polymerize for 60 sec (remove sticky layer)
7)We use a shape (e.g. dualforms) to build up the free edge
8) Apply a transparent gel to the shape of an artificial nail and let it dry for 60 seconds in the lamp
9) Dust the free edge and create the desired shape
10)Wipe away the sticky layer and excess dust
11) Reapply rubber base to the areas you filed and let it dry for 60 seconds
12) Line with builder gel of your choice, place in lamp and hold for 10-15 seconds (clamp if necessary). If the gel is very sticky or contains glitter, dry for 20-30 seconds as described above.
13) Polymerize (fully) for 120 seconds
14)Remove adhesive layer
15)Use top coat of your choice
Ingredients INCI: Acrylates Copolymer, Hema, Trimethylbenzoyl Diphenylphosphine Oxide May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510 Caution: For professional use only. Keep out of reach of children. Discontinue use if irritation occurs. Avoid eye contact, if eye contact occurs, flush with water and seek medical attention. Keep out of sunlight. Can cause an allergic reaction. Avoid skin contact. Read directions for use carefully. Country of Origin: Ukraine ,EU registration Riga, LV-1019

Lunamoon builder gel 20

Application technique for reinforcement

Application technique for extension with dualforms

ingrediënten